Skip to end of metadata
Go to start of metadata

Document Revision
Document number: 5570569
Release: Mar 11, 2016 17:10
Document version: 15

Table of Content

Introduction

The Bluetooth modules from u-blox are already Bluetooth qualified and listed.

Any products carrying the Bluetooth trademarks (wordmark and / or figuremark) must have undergone the Bluetooth Qualification Program and the owner of these products must be a member of the Bluetooth SIG and have signed the Bluetooth Trademark Agreement (BTLA). 

The Bluetooth products listed below have been qualified according to its corresponding Bluetooth Specification (currently Classic Bluetooth 2.1+EDR or Bluetooth 4.0 with Bluetooth low energy). A u-blox customer that is a Bluetooth SIG member shall comply with applicable agreements and qualification and listing requirements.

For more information see  https://www.bluetooth.org/en-us/test-qualification/qualification-overview.

Qualified Design IDs

The table below lists the different QD IDs used for different u-blox Bluetooth modules.

These QDIDs are reflecting the Bluetooth End Product listing that was active before February 1, 2014, and is kept for reference only. If you need more information on how to list a product based on u-blox module, please contact our support, support@u-blox.com.

Product

Controller Subsystem

QD ID for
Controller Subsystem

QD ID for
Host Subsystem

QD ID for
Profile Subsystem

cB-OBS418

cB-OBH421

30664

16126

-

cB-OBS419

cB-OBH421

30664

16126

-
cB-OBS421
Firmware version >= v5.0 with the Bluetooth Low Energy option disabled.

cB-OBH421

30664

16126

-

cB-OBS421
Firmware version >= v5.0 with the Bluetooth Low Energy option enabled.

cB-OBH4213066440911-
cB-OLP425cB-OLH42536535

26384

35040

cB-OLS425cB-OLH42536535

26384

35040

cB-OLS426cB-OLH42536535

26384

35040